24/7 EMERGENCY RESPONSE EMERGENCY ONSITE IN 45 MINUTES DIRECT INSURANCE BILLING IICRC CERTIFIED FIRM
Real People. 24/7.A live person answers
45-Minute ResponseFor emergency calls
Direct Insurance BillingHelp with claim documentation
IICRC Certified FirmProfessional restoration standards

ARS PROPERTY-DAMAGE RESOURCE GUIDE

Sewage Backup in Your Home: What to Do First, What to Throw Out, and How Insurance Usually Works

Last updated November 2026 · Technical review: ARS Restoration & Reconstruction · Educational guide for homeowners, renters and property managers in Southwest Washington and the Portland metro

Short answer: Stop using every drain in the house, keep people and pets out, and don’t touch the water without boots, gloves and eye protection. Photograph everything before anything is moved, find out whether the blockage is in your line or the public main, and call your insurer to ask whether you have a sewer or water backup endorsement. Anything porous that sewage soaked (carpet and pad, drywall, insulation, mattresses, upholstered furniture) usually can’t be saved.

If anyone may be in danger, or you smell gas, leave and call 911 or the gas utility first. Don’t walk into standing water if outlets, cords, appliances or the electrical panel may be wet.

Why sewage is different from other water damage

Restoration professionals sort water damage by how contaminated the water is. Under the ANSI/IICRC S500 water damage standard, sewage is Category 3, “grossly contaminated” water that can carry bacteria, viruses and parasites (IICRC S500). That category drives everything else: what protective gear is needed, what has to be removed rather than dried, and how the area is cleaned.

A few distinctions homeowners often ask about:

  • Toilet overflow vs. sewage backup. Water from a toilet tank or supply line, before it reaches the bowl, usually starts out clean (Category 1). Water that overflows from the bowl is at least Category 2, and Category 3 if it contains feces. A sewage backup comes up through floor drains, tubs, showers or toilets from the sewer line or septic system, and is treated as Category 3. For more on categories, see Categories 1, 2, and 3 Water Damage.
  • Clean water can become contaminated. A clean-water leak that sits for days, or runs through a dirty crawlspace, can become more contaminated over time.
  • Crawlspace homes. Many homes in our area sit over a crawlspace. A broken drain line under the house can release sewage onto the vapor barrier and soil for weeks before anyone notices. Signs include a sewer smell that comes and goes, slow drains, and flies or rodents near crawlspace vents.

Step by step: the first hour

1. Stop adding water

Stop using every toilet, sink, tub, shower, dishwasher and washing machine in the house, and ask everyone else in the household to do the same. Each flush or drain pushes more wastewater toward the blockage. In multi-unit buildings, tell the manager right away, because upstairs units may be draining into the backup.

2. Get people and pets out

Keep children, pets and anyone who doesn’t need to be there out of the affected area. People most at risk from exposure, including young children, older adults, pregnant people, and anyone with a weakened immune system or a lung condition, should stay away until cleanup and drying are finished. If someone develops a fever, vomiting, diarrhea or an infected cut after contact, call a medical provider.

3. Deal with electricity and gas safely

If you can reach the main breaker from a dry location, turn off power to the affected area. If you would have to step into water to reach the panel, don’t. Call an electrician or the utility instead (CDC: Reentering Your Flooded Home). Have an electrician check any wet outlets, appliances or furnaces before you use them again.

4. Protect yourself if you must go in

The CDC advises rubber boots, rubber gloves and goggles whenever sewage is involved, and covering any cuts with a waterproof bandage (CDC: Clean Up Safely After a Disaster). Add an N95 respirator if you’ll be moving wet materials. Wash your hands with soap and clean water afterward, and before eating, drinking or touching your face.

5. Limit the spread

  • Close doors to the affected area.
  • Turn off the furnace or air handler if supply or return vents are in the affected area or the crawlspace is contaminated. Running it can move odors and contaminants through the house.
  • Don’t track through the area. Leave shoes at the edge.
  • Don’t use a household vacuum or carpet cleaner on sewage.

6. Photograph and video everything before anything moves

Insurers and contractors both rely on what the scene looked like before cleanup. Take:

  • Wide shots of each affected room, then close-ups of the water line on walls, cabinets and furniture.
  • The point where sewage came in (floor drain, toilet, tub, cleanout).
  • Serial and model numbers of damaged appliances.
  • A short narrated video with the date, time and what you saw.

Write down when you first noticed the backup, who you called and when. Our Property-Damage Documentation Checklist has a full template.

7. Find out where the blockage is

Who fixes the blockage depends on where it is:

  • Your own line. In the City of Vancouver, the property owner owns and maintains the sewer lateral (side sewer) from the house to the public main (Vancouver Municipal Code 14.04.100). A plumber or drain cleaning company usually clears and camera-inspects it.
  • The public main. If neighbors are also backing up, or your cleanout is dry while the house is backing up, call your sewer provider. That’s City of Vancouver Public Works for city customers, and Clark Regional Wastewater District for much of unincorporated Clark County. Other cities and districts have their own lines.
  • A septic system. If you’re on septic, call a septic service. A full tank or failed drainfield can cause a backup.

Cleanup should wait until the line is flowing again. Otherwise the next flush undoes the work.

8. Call your insurer, and ask the right questions

Report the loss promptly, write down the claim number, and ask:

  • Do I have a sewer backup or water backup and sump overflow endorsement? What is its limit, and is there a separate deductible?
  • What emergency work is authorized right now?
  • Do you want to see damaged items before they’re thrown out, or are photos and a list enough? (Contaminated items shouldn’t stay in the house for long.)
  • Do I need written approval before permanent repairs?

The insurance section below explains why these questions matter.

Can you clean it up yourself?

Sometimes, but only for a narrow case.

A small backup may be manageable if it is limited to a hard, sealed floor (tile, sealed concrete, vinyl), it didn’t soak into walls, cabinets, carpet or rugs, it was caught quickly, and nobody in the home is at higher risk. Public-health guidance for that situation (summarized from the CDC and the EPA):

  1. Put on boots, gloves, goggles and an N95.
  2. Remove standing water and solids, and bag the waste.
  3. Wash hard surfaces with hot water and detergent first. Disinfectants work poorly on surfaces that are still dirty.
  4. Disinfect with a product labeled for the purpose, following the label’s contact time. Never mix bleach with ammonia or other cleaners.
  5. Dry everything completely, ideally within 24 to 48 hours. That’s the window the EPA and CDC give for preventing mold growth.
  6. Wash work clothes separately in hot water, and wash your hands well.

Call a professional if any of these apply:

  • Sewage reached carpet, pad, rugs, drywall, baseboards, cabinets, insulation or subfloor.
  • More than a small area is affected, or sewage is in a crawlspace, wall cavity or HVAC system.
  • The water sat for more than a day or two, or you already smell mustiness or see mold.
  • Someone in the home is young, elderly, pregnant, immunocompromised or has a breathing condition.
  • You aren’t sure what’s wet. Sewage wicks up drywall and travels under flooring farther than it looks.

The EPA’s advice is direct: if water or mold damage was caused by sewage or other contaminated water, “call in a professional who has experience cleaning and fixing buildings damaged by contaminated water” (EPA: Mold Cleanup in Your Home).

What usually has to be thrown away, and what can be saved

Usually discarded after sewage contactOften cleanableAsk a specialist
Carpet and pad, area rugsHard plastic, metal, glass, ceramicPhotos, documents, books with sentimental or legal value
Drywall and insulation that got wet with sewage (CDC)Sealed hardwood or solid wood furniture (case by case)Electronics
Mattresses, box springs, pillows, upholstered furnitureMost hard flooring that’s in good shapeHeirlooms, art, textiles you can’t replace
Stuffed toys, baby items, cosmetics, food and medicine that got wetWashable clothing (hot-water laundry, if it can be fully cleaned)Appliances (have them checked before use)
Particleboard cabinets and furniture that swelledConcrete (after cleaning, disinfecting and drying)

The discard list follows the CDC’s cleanup guidance, which says to remove and discard drywall and insulation contaminated with sewage or floodwater and to throw away items you can’t clean and dry quickly (CDC: Guidelines for Cleaning Safely After a Disaster). Photograph and list each item before it goes, with brand, model and approximate age. Your insurer may want that inventory.

What a proper professional cleanup includes

Whoever you hire, the work should generally follow the ANSI/IICRC S500 standard for Category 3 water. Expect:

  1. Safety and source check. Confirm the line has been cleared and identify electrical, gas and structural hazards.
  2. Containment. Plastic barriers and, when needed, negative air pressure with HEPA-filtered air scrubbers so contamination doesn’t spread to clean rooms.
  3. Protective gear for workers, and keeping occupants out of the work area.
  4. Extraction of liquid and solids.
  5. Removal of contaminated porous materials, typically including drywall cut above the highest wet point, insulation, carpet and pad, and in crawlspaces the contaminated vapor barrier and sometimes the top layer of soil.
  6. Cleaning, then antimicrobial treatment of remaining surfaces, using products registered for that use.
  7. Drying with moisture readings recorded daily until materials reach a documented dry goal. See How professionals know a building is dry.
  8. A final check before walls are closed: no visible residue, no sewage odor, dry readings, and photos of the open cavities.

You should be able to get copies of photos, moisture logs and a written scope. They help with the claim and with any later sale of the home.

Sewer backup and insurance: what's typically covered or excluded

Your policy, not this page, decides coverage. Read the declarations page and endorsements, and ask your agent or insurer.

  • Standard homeowners policies usually exclude it. Washington’s Office of the Insurance Commissioner lists sewer or drain backups among the things standard homeowner policies do not cover (WA OIC: The risk of being underinsured). Oregon’s Division of Financial Regulation says most policies exclude water that backs up through sewers or drains, and that most insurers offer limited coverage for an additional premium (Oregon DFR: Top 10 home insurance myths).
  • The fix is an endorsement. It’s often called a “sewer backup,” “water backup” or “water backup and sump overflow” endorsement. These endorsements usually carry their own coverage limit, which may be well below your dwelling limit, and sometimes their own deductible. The WA OIC’s consumer guide describes this endorsement (WA OIC: A consumer’s guide to homeowner insurance, PDF). Wording varies between insurers, so read yours.
  • Flood is separate. Homeowners policies exclude flood, and flood insurance is a separate policy (WA OIC: Flood insurance). If sewage came up during area flooding, ask both carriers how they’ll handle it.
  • Groundwater and slow leaks are different claims. Seepage through a foundation and gradual leaks are generally not covered (WA OIC: Leaks, water damage, and mold).
  • The pipe itself is a separate question. Even when cleanup is covered, repairing or replacing your broken sewer lateral may not be. Some insurers sell a separate service-line endorsement.
  • Mold that follows a backup is often covered only within a limited mold sublimit, if at all, and usually only when the water event itself is covered.
  • Renters: renters insurance covers your belongings (subject to the same kind of backup exclusion and endorsement), and the landlord’s policy covers the building.
  • If the public sewer caused it, ask your city or sewer district about its claim process right away. Vancouver’s municipal code sets short deadlines and specific criteria for some reimbursement claims (VMC 14.04.100).

Documenting the loss. Insurers generally expect prompt notice, reasonable steps to prevent further damage, and records. Oregon’s DFR advises protecting the property from further damage and saving receipts, not making permanent repairs until the insurer inspects, and listing damaged items with brand names and model numbers (Oregon DFR: Storm damage). Keep every receipt for emergency work, hotel stays and supplies.

If you’re stuck, Washington residents can ask the Office of the Insurance Commissioner for help, and Oregon residents can contact the Division of Financial Regulation. Both are free. See our Washington Consumer Insurance Help page.

How to choose a sewage cleanup company

You can usually choose your own contractor. Oregon’s DFR states it plainly in its homeowners bill of rights (Oregon DFR, PDF). In either state, ask your insurer whether it has preferred vendors and whether using one is required. Before you sign:

  • Check the license or registration. In Washington, look the company up on L&I’s Verify a Contractor tool to confirm active registration, bond and insurance. In Oregon, check the Construction Contractors Board.
  • Check IICRC certification. Confirm the firm on IICRC Certified Firm Verification and ask whether the technicians on your job hold the Water Damage Restoration Technician (WRT) or Applied Microbial Remediation Technician (AMRT) credential. Washington doesn’t require a special state certification for water or mold restoration work, so voluntary certification is one of the few signals you have (WA DOH).
  • Get a written scope. It should list what will be removed, how the area will be contained, how drying will be measured, and what “done” means.
  • Read the whole work authorization, not just the signature page. Look at cancellation terms, who gets paid (some forms direct insurance payments to the contractor), and what happens if hidden damage is found.
  • Ask for documentation: photos before and after removal, daily moisture readings, and a final dry report.
  • Be cautious about pressure. Be wary of anyone who pushes you to sign before you’ve talked to your insurer, discourages you from getting a second opinion, or can’t explain the work in plain language.

How to lower the odds of another backup

  • Flush only toilet paper. “Flushable” wipes, paper towels and hygiene products cause clogs.
  • Keep fats, oils and grease out of drains. The City of Vancouver lists this, along with not flushing wipes, as a simple way to prevent clogs and backups (City of Vancouver: Sewer and Wastewater).
  • If your home has older clay or cast-iron sewer pipe, or large trees near the line, ask a plumber about a camera inspection.
  • Ask a plumber whether a backwater (backflow) valve makes sense for your house. The WA OIC suggests this for homes on a sewer system (WA OIC: Flood insurance).
  • Know where your cleanout is and keep it accessible.
  • Review your policy before anything happens, and decide whether a backup endorsement and its limit fit your home.

Frequently asked questions

What should I do first when sewage backs up into my house?

Stop using every toilet, sink, shower, dishwasher and washing machine so you don’t push more wastewater into the backup. Keep people and pets out, turn off power to the area only if you can reach the breaker from a dry spot, and wear rubber boots, gloves and eye protection if you must go in. Photograph everything before anything is moved, then call a plumber or your sewer provider to clear the blockage and your insurer to report the loss.

Can I clean up a sewage backup myself?

Only a small backup on a hard, sealed floor that was caught quickly is a reasonable do-it-yourself job, and only for healthy adults wearing boots, gloves, goggles and an N95. Wash with detergent first, then disinfect following the product label, and dry everything within 24 to 48 hours. If sewage reached carpet, drywall, cabinets, insulation, a crawlspace or the HVAC system, the EPA advises calling a professional experienced with contaminated water.

Does homeowners insurance cover a sewer backup?

Usually not, unless you added a sewer backup or water backup endorsement. Washington’s Insurance Commissioner lists sewer or drain backups among the things standard homeowner policies do not cover, and Oregon’s regulator says most policies exclude them but most insurers offer limited coverage for an extra premium. Endorsements usually have their own limit and sometimes their own deductible, so check your declarations page and ask your agent.

Who is responsible for a sewer backup, me or the city?

It depends on where the blockage is. In the City of Vancouver, property owners own and maintain the sewer lateral from the house to the public main, so a clog or break in that line is the owner’s to fix. If the public main is blocked, the city or sewer district handles the main. If neighbors are backing up too, call your sewer provider first.

What has to be thrown away after a sewage backup?

Following CDC cleanup guidance, porous items that were soaked with sewage are usually discarded: carpet and pad, rugs, mattresses, upholstered furniture, stuffed toys, and the drywall and insulation the sewage touched. Hard, non-porous items such as metal, glass, ceramic and hard plastic can usually be cleaned and disinfected. Photograph and list everything before it goes, because your insurer may need the inventory.

Is it safe to stay in the house after a sewage backup?

Often you can stay if the affected area is closed off, the rest of the house is unaffected, and the HVAC system isn’t pulling air from the contaminated area. Young children, older adults, pregnant people, and anyone with a weakened immune system or a lung condition should stay away from the affected area until cleanup and drying are finished. If a main living area or the only bathroom is affected, ask your insurer about temporary living expenses.

How do I know a sewage cleanup was done properly?

Before walls are closed, there should be no visible residue and no sewage odor, contaminated porous materials should be gone, and moisture readings should show the structure has reached a documented dry goal. Ask the company for a written scope, photos of the open areas after removal and cleaning, and daily drying logs.

How can I prevent another sewage backup?

Flush only toilet paper, keep grease and wipes out of drains, and have a plumber camera-inspect older sewer lines or lines near large trees. Ask a plumber whether a backwater valve makes sense for your home, know where your cleanout is, and review whether a sewer backup endorsement and its limit fit your home before anything happens.

Questions about a sewage backup?

ARS Restoration Services handles sewage cleanup in Clark County and the Portland metro and can answer questions by phone, whether or not you end up hiring us. For active emergencies, crews are onsite in 45 minutes, 24/7.

Related guides

Sources, scope, and review

(360) 907-0156
Chat with us